UKRG Event: Think Green - Building a Better Box

Building a Better Box

Andrew Stramentov, CEO and Founder of ROKBOX

Friday 7th February 2020 National Army Museum

The traditional wooden packing crate is a source of a huge amount of waste in exhibition-making, with most cases being disposed of after use. ROKBOX has been developed as a reusable alternative for transporting two-dimensional artworks, and the company’s founder Andrew Stramentov talked us though its evolution.

As well as a desire to make art transport more environmentally sustainable, Andrew drew on his previous experience in the sector of when things go wrong with conventional crates – from a painting becoming loose and sustaining irrevocable damage due to the wrong screws being used, to water getting in through a crack during a rainstorm – to look for opportunities to improve them. He also pointed out, rather amusingly, that wood isn’t a go-to protective material in other areas; we don’t wear wooden helmets, lock our valuables in wooden safes, or strap children into wooden car seats. He obtained funding to found his business around five years ago, describing the environment for startups in the UK as supportive.

Andrew and his team began by collecting information to further inform the development of ROKBOX. They spoke to insurers to gather data on accidents involving standard crates, reviewed relevant literature, and consulted with museum and gallery professionals on why things sometimes go wrong, and what could be done better. Their findings were used to create a prototype, working with industrial designers Glenelg who brought an objective, non-art perspective to the project.

The new product was then tested to measure how well it performed against other crates in a specialist testing facility, and independently validated by an engineering academic from the University of Leicester. The case was subjected to dropping, vibrations, water immersion, forklift impact and temperature and relative humidity variations, amongst other things – an expensive and lengthy process. In terms of its environmentally friendly objectives, Andrew explained that, as well as being reusable, the lightweight design translates to a lower carbon footprint because of the reduced energy required to transport it.

Hearing about the journey to create ROKBOX was fascinating, and it’s encouraging to see people working on practical solutions to reduce the impact of art transportation on the environment, as well as potentially reducing risk to works. ROKBOX cases have been sold to a number of galleries and transport agents, and the product range is currently being expanded. It will be very interesting to follow how ROKBOX works in practice as it is rolled out, in terms of considerations such as cost, institutional and lender expectations, and flexibility.

Denise Courcoux, Assistant Exhibitions Registrar, Tate Liverpool

UKRG Event: Think Green - Towards Sustainable Shipping

Martin Speed Ltd. – Towards Sustainable Shipping

Simon Sheffield Executive Chairman of Martinspeed Ltd.

Friday 7th February 2020 National Army Museum

When lending and borrowing works of art who is responsible for sustainability and who pays – the lender? Borrower? Shipper?  This question was posed by Simon Sheffield during his presentation on Martinspeed’s efforts toward sustainable shipping. Sustainability is expensive and time consuming but as the quote on the Martinspeed website puts it, ‘one small step by everyone can help to change everything’.

We all have a shared responsibility and in 2010 Martinspeed committed to theirs in setting out their Environmental Policy (see link below).  Simon took us through the various areas of sustainable progress within the company:

Crating and packaging

The company hasn’t sent any wooden crates to landfill in ten years. This has been achieved firstly by re-using them. A dedicated recycling team drives around London, (in an electric van), to schools, allotments, carpenter’s workshops, universities and so on.  Notably, Martinspeed provided all the timber for the temporary shelter constructed following the Grenfell Tower fire.

They have also produced new flight cases (speed cases) which can be refitted for each use and house multiple works. Poly takes 500 years to decompose and lets off harmful gases as it does so. Martinspeed re-use it where possible and if it can’t then it is baled using one of the companies’ compactors along with other packing materials such as cardboard and then sent for recycling.

Fuel reduction

They have invested in 22 new vehicles that meet the EURO 6 standard, this includes electric vehicles and charging facilities. In addition to this they consolidate loads where possible – this is something that Museums and Galleries can contribute to with good forward planning and a flexible attitude. They work closely with other agents across Europe, utilising road freight shuttles and consolidating or backloading vehicles where possible.

Warehouses and offices

The theme of consolidation continues with Martinspeed’s buildings. The company has worked to consolidate its warehouses, three of which occupy the same road. This has reduced vehicle runs between buildings and therefore reduced emissions.  Their most recent warehouse has been designed with sustainably in mind; solar panels on the roof (there are solar panels on all of the stores rooves), intelligent LED lighting in offices and warehouses (reducing usage by half), thermal insulation and water collectors.  The offices are also moving toward becoming paperless.  In 2016 they were using 1 million sheets, they have now halved that number by using an integrated IT system, barcoding, 4G scanners and storing information on servers. 

Sustainability can be overwhelming. Where do we start? At Martinspeed they started by bringing in consultants to assess their warehouses and offices. This gave a clear idea of what they needed to tackle. Following a question from the audience Simon clarified that the drive for change at Martinspeed came from the top – the ideal scenario. Some of the other speakers gave an insight into change instigated further down the hierarchy, both examples equally inspiring. The overriding message is that we all need to get involved wherever we sit within our organisations. Thanks to Simon and the other speakers for inspiring us to do just that.

https://mk0martinspeedkj82n9.kinstacdn.com/wp-content/uploads/Environmental-Policy.pdf

Emily Goalen, Loans Officer, Aberdeen Art Gallery & Museums.

UKRG Event: AGM & Loans in - Negotiating loans in

I’ll make an offer you can’t refuse – negotiating loans in. 
Carol Burnier, Exhibitions Registrar, Tate Modern
UKRG AGM & Loans in, Friday 18th October 2019

Carol summarised the world of loans in as “expect the unexpected”. You don’t have complete control as owners and lenders have their own requirements and expectations. Where these differ from what we might be willing or able to accept then the exhibition registrar needs to negotiate solutions. An average exhibition at Tate has about 50 lenders and between 100-200 loan objects.  That’s a lot of negotiating but it is normally successful. It is rare that works must be dropped from exhibition lists because it has not been possible to meet lenders requirements.

Key to success is the involvement of exhibition registrars at least two years ahead of the exhibition opening (longer if it is a tour and Tate are the first venue) Firstly the exhibition registrars review the list of proposed lenders and advise the management team of the likely requirements of known lenders. If one of the Tate registrars hasn’t worked with a specific lender before then they can reach out to the rest of the team including colleagues at Tate Liverpool and Tate St Ives. Often Tate are borrowing from the same pool of lenders, so requirements are familiar, and relationships already established. Of course, there will always be new lenders, and this is where the unknown element comes in. Lenders may have unique requirements around many aspects, such as shipping, display methods, security, couriers or per diems.

It is important to recognise that negotiation styles vary widely across the world. UK registrars are very solution focused and we have the flexibility to make changes, sometimes this flexibility is not an option for other organisations. Some registrars have very strict processes within which they must operate. Carol recalls being asked in one case for a utility bill to prove that Tate existed!

It is important to establish and open, honest and collaborative dialogue. Sometimes asking the lender and open questions such as “how do you think we can move this forward” will elicit a solution. If you see something is going to be a problem try and come up with a solution before discussing it – don’t present problems, present solutions!

It is important to know and understand the GIS guidelines as you will need to be able to confidently explain these to lenders who are unfamiliar with them. Getting lenders to accept indemnity is especially important for national institutions as they need DCMS permission to use commercial insurance. Remember that sometimes confusion can arise with international lenders over immunity and indemnity!

If you have built up a good relationship with the lender during the run up to the exhibition then if things go wrong in the final phase (such as cargo shipments being bumped by horses!) the relationship you have built up will help the lender trust you.

Many situations are not always black and white, there are a lot of grey areas, and this is where you use your experience or reach out to colleagues and the wider UKRG network for support if required.

Carol finished of by summarising the key points “trust your experience, reach out to the expertise around you and expect the unexpected”

Thanks to Carol for sharing her knowledge and to Blackwall Green for the travel bursary.

Jacqui Austin, Lead Registrar: Loans, touring & partnerships, National Galleries of Scotland

UKRG Event: Hands on Registration - Packing crates, old vs new.

Packing crates: A Tale of Old vs New.

The bedrock of loans and exhibitions, the time tested method of transporting objects from A to B and a concept that is centuries old: the packing crate. The UKRG’s Hands on Registration event ended with Constantine’s Mark Hunt who gave a guided tour from the history of the packing crate to the newest in crate innovations.

Mark started by signposting Art in Transit: Handbook for Packing and Transport Paintings as a go to guide for registrars and technicians everywhere. This was the first scientific investigation of its kind into the packing crate providing the first industrial standard. Tate were responsible for the earliest crate specification for the iconic yellow crate which has since been widely adopted.

In order to further investigate the exacting science of the packing crate, Mark headed to two factories to record a behind the scenes glimpse of their very different production methods.

The traditional yellow crate was up first, and Mark started by visiting a workshop in the East end of London where they produce 20-30 crates a day. Working from bespoke paper orders one person goes through the entire manufacturing process, creating the finished product almost entirely by hand. The main components of a traditional crate are plywood, heat-treated timber, glue, paint, nails and staples. Mark highlighted that the main cause of expense in this process is the laborious fitting of screws to the outside of the crate.

The innovative Turtle crate developed by Hizkia Van Kralingen was up next. Mark headed to Airborne in Berkshire to witness how these crates of dutch design are manufactured. Unlike the traditional crate, Turtle crates are all made to a standard size. The main components are also somewhat different. The Turtle is made from fibreglass, two types of foam and neoprene sheets. Crates are shaped using a molding process. It takes an entire day to make one crate as a new mold has to be created each time. The crate is fitted out with insulation panels and soft foam. A black, velcro wrapped board floats in the create which allows it to minimise shock to the art work which is attached to the board with velcro-backed packing blocks.

Accepting that both models were equally fit for purpose, Mark’s comparison of the two crates was based upon the timely issue of sustainability and re-usability. During production there were low levels of waste from both processes. Despite its durability, however, the traditional crate is very difficult to recycle. When not being used for transportation purposes, traditional crates tend to be used as storage but this relies upon collections stores being large enough to accommodate them. The rent-a-crate concept of Turtle means that it is ultimately reusable. A crate has yet to be thrown away attesting to their at least twenty year lifespan. For most institutions, the practicality of the traditional crate means that it still wins out.

In response to Mark’s talk conference delegates aired their concerns over the inability of the Turtle to accommodate 3D as well as 2D objects. There was also an emphasis on the availability of other reusable crates such as Rokbox and a desire for Museums to take a proactive approach to adopt a new more sustainable standard.

Written by Eve Sladdin, Collections Information Assistant Registrar, National Galleries of Scotland

UKRG Event: Hands on Registration - Hanging 101

Hanging 101. Tim Crowley, Collections and Exhibition Technician, Ashmolean Museum

Tim Crowley started to work at the Ashmolean in 2009, when the museum was refurbished and opened a new extension. Tim has worked on numerous projects, including permanent galleries and temporary exhibitions such as Jeff Koons, Andy Warhol and Francis Bacon/Henry Moore.

Tim’s talk focused on the preparation of 2D works before they can go on display or on loan, and covered: the choice of glazing and backing, the best (or worse) display location within an exhibition space and the choice of hanging fittings.

Glazing and backing

Ideally, a work is glazed and backed, especially before going on display. The glazing acts as a physical barrier between a painting and the external environment and protects it against many threats such as dust or visitors’ fingers. It also offers climate regulation and in some cases, UV filtration.

Glazing can be acrylic (Perspex) or glass (often laminated low reflective glass).

It is important to identify the type of glass used on an artwork before packing it for a loan as some types of glazing will require taping while tape will damage others (LLRG for example).

The best way to tell the difference between Perspex and glass is the weight of the glazing. Glass will also be cooler to the touch. Laminated glass generally makes a dull sound when taped.

Perspex is generally used for larger works as it is much lighter. However, low reflective acrylic is generally more expensive than laminated low reflective glass.

Materials for backing can also vary: from soft fabric film, hardboard, twin wall polycarbonate, etc. A rigid baking is recommended as it will protect the work during the handling and reduce the risks of puncture. However, the backing can also add to the weight of the painting. Twin wall polycarbonate is a good option as it is light, transparent, rigid and includes a UV filter, but it is expensive (whereas hardboard is cheap).

Hanging fittings

Ideally, the fittings will be attached to the work before the works goes on loan and the work will be hung to the wall with at least 3 point of contact.

Many different types of fittings are used in museums and galleries to hang 2D works. All of them have their pros and cons and every institution or technician have their preferences.

During his talk, Tim detailed some of the hanging fittings used at the Ashmolean:

Tim insisted that, if the preparation of the artwork itself is key, it is also important to prepare the area where the artwork will be displayed.

Where NOT to hang an artwork.

Artworks should not be hung on external walls, above heat sources, in high traffic areas (risks of degradation), in direct sunlight or under picture lamps, in areas where food is prepared or consumed, on plasterboards thinner than 12mm, near heavy fire doors, lifts or IT services (vibrations) or near non-secured doors or windows for small works (theft).

When installing an artwork, we should also always be attentive to the environmental conditions (stable temperature and relative humidity within an appropriate range is required).

Wall structures

There is often a level of uncertainty in museums and galleries about the appropriate type of wall structures necessary to support an artwork.

The main materials used are plywood, plasterboard and MDF.

If you are not sure about the type of walls you have, a simple test is possible: put masking tape on a drill, drill into the wall up to the masking tape and the residue on the tape should indicate the type of structure: dust/powder = plasterboard; small hardwood fragments = plywood; softwood spirals = MDF; red/orange dust = brick; grey dust = concrete (avoid drilling in concrete walls if possible as it is very hard, dusty and messy and creates vibrations).

A screw should never continue to spin when installed. If this is the case, it shouldn’t be used to hang an artwork.

Screws are generally very strong and the weight capacity/strength should be detailed on the packaging. However, the solidity of the wall should be more of a concern than the solidity of the screws. A wall structure without wood won’t be as solid and it may need to be reinforced (by adding plywood for example) or more hanging fittings may be necessary to secure the work on the wall.

There is not ideal way to securely hang an artwork on a wall: the different options won’t be efficient, secure, aesthetic, easy to use and cheap at the same time. This is why it is important that the different options are discussed collectively with technicians, curators, conservators, registrars and lenders as early as possible in order to assess the risks and the resources and decide on the most appropriate solution.

Delphine Charpentier, Assistant Registrar (Loans), National Galleries of Scotland

UKRG event: hands on registration - Mounting & Display of 3D objects

Mounting & Display of 3D Objects.

Richard Rogers ACR, Founder and Managing Director of Richard Rogers Conservation Ltd

Richard Rogers started out as a silversmith, and since then has carved out a 40-year career in the design and implementation of 3D object mounts. He has worked on some amazing exhibitions over the years, early examples being English Romanesque Art at the Hayward Gallery and Age of Chivalry: Art in Plantagenet England at the Royal Academy in the 1980s. He also worked on the redevelopment of the Imperial War Museum; the first-time round, and again 26 years later when the WWI Gallery was revamped in 2015! More recent exciting projects have included a display of ship figureheads at the Cutty Sark and the Ice Age exhibition at the British Museum.

Key to deciding on a mount is the condition of the object and the fragility of its surfaces. Safety and preservation of an object must come before any aesthetic choices. Weight, strength and the suitability of showcases are important to discuss early. Have all materials been subject to the Oddy Test? Design is also important, and so early conversations between the designer and conservators should be had for a coordinated approach. A coherent display will generally have consistency in its materials, so the presentation of 3D objects should be considered early. Seek advice from a mount maker, who can offer sympathetic recommendations while also prioritizing conservation.

Richard talked us through the basic materials of mounts and brought in some sample materials to look at. He described brass armatures, security mounts with concealed fixings, and the fabrication of metal mounts at the workshop. We looked at ZFMDF, which is not particularly liked by mount makers as it is messy to cut. Forex cuts cleanly, can be used as a showcase inner and can be sprayed to different finishes. Acrylic is a good option for book cradles as it can be contoured to support the spine of a book. It has a range of thicknesses, finishes and comes in a UV grade. Hexlite is light and strong and can be wrapped in fabric and Dibond is a thin, shiny material, which can’t take much weight. Protective materials often used in conjunction with mounts include polyester felt, clear Melinex sheets and clear tape (for securing book pages), aluminium tape, and Dacrylate lacquer.

Richard described how on a project there will often be multiple visits required, first to see the objects and measure up to make a template, then for any tweaking. The take-home message from Richard’s presentation was just how wide a range of practical methods there are for displaying 3D objects creatively. Speaking early on with a mount maker during the design process of an exhibition or display allows time for creative flare and clever solutions.

Written by Lucy Davis, Assistant Exhibitions Manager, Royal Academy of Arts

UKRG Event: hands on registration - Display Cases

Display Cases: Getting into the Subject

Lewis Brooks, Exhibition Technician at the Imperial War Museum gave an introduction to working with display cases. There are a large range of different display cases, but for the purposes of this overview Lewis broke them down into two different types, looking at the advantages and potential limitations of both.

Evolution showcase by Tess Demountable http://www.tessdemountable.co.uk/showcases/evolution/

Purpose built showcases

Fully enclosed units.

Often used for permanent displays.

Can be very expensive so not always a good option for temporary exhibitions.

‘Set work’ display cases

Set work cases are bespoke and can be built into other structures.

They can be fabricated by in house technicians, or by external companies such as Qwerk or Glashause.

They are often cheaper than purpose built cases, but can be problematic if the design or construction is not thought through.

Opening cases

Talk to your technicians! They will have the knowledge and understand any quirks of specific cases. Many purpose built cases will use Abloy keys, which are difficult to copy or replace if lost. They have a code that must be sent to the manufacturer to order replacement keys, which can be costly.

Locking systems can vary and might be concealed from view, so if you can’t see where the case opens look out for keyholes and hinges to give you a clue. Locks might be barrel locks, t bar, pop up locks or cylinder locks. Sometimes the lock pops out a little bit when you unlock the case, and sometimes the entire locking mechanism will come out completely.

Sometimes case doors and lids are hinged so that they simply open outwards or tilt back. In other case types the door may slide across: often these cases have clever mechanisms to stop you sliding the door too far, but not always! Use caution and don’t push the door too far open.

Problems with access

If you are struggling to open a case, start by checking the following:

·         Is the key far enough into the lock?

·         Sometimes the cylinder of the lock can become misaligned. Try turning the key slightly as you push it in.

·         Sometimes case doors can drop over time and put pressure on the lock. Use glass suckers (and an extra pair of hands) to help lift the door while you unlock it.

More about set works

It can be more tricky to get into set works cases, since the fixings will often be hidden in exhibition design or architecture. For example, the case might be a box with a glass or acrylic panel held in with security screws. It is a good idea to cover the screw heads whilst on display.

Acrylic hoods on table tops or vitrines can be heavy and require a lot of hands to open up safely. There will be lots of small and fragile objects underneath and the hood will need to be lifted off and over the table.

Access points could also be through parts of the building you wouldn’t normally need to know about, such as crawl spaces. Bring a head torch and ask for help!

Case opening procedures

Before opening a case, ask:

·         Does it contain hazardous materials?

·         Is the case conditioned? Is the whole gallery conditioned?

·         If you are unsure, take advice from a conservator

Check your organisation’s policies on accessing objects inside display cases.

Case seals

Seals are essential for maintaining the environment in a case. Purpose built museum cases will have good, airtight seals but they can deteriorate through time, come loose or be tampered with by visitors. Check case seals are not misaligned and that there are no visible bumps. Take care opening and closing cases to prolong the life of the seals.

Case materials

Set works can be constructed from a range of different materials. Note that many institutions have stopped using MDF as it is porous and must be sealed. Forex is a better material for cases.

Samples of common case materials

Common pitfalls

Cases are sometimes so effective at their job that they can cause other problems. For example, some are so airtight that the suction created in opening and closing the case can cause lightweight objects to move.

Static is a common problem, which can be minimised by using an anti-static spray.

When planning displays remember to think about the opening/closing mechanism of your case. Check the angle of opening to make sure your objects will fit and avoid any last minute panic when you have couriers and lenders present.

Think about the type of objects and handling requirements when planning case layouts. If the handling instructions for an object state that it needs 3 people to install it, check that you can fit that many people around the case door. Likewise, consider the architecture and wider design of the space.

Written by Rachel Graves, Collection & Exhibitions Manager, The Hepworth Wakefield